cumulative

G.12 Selecting and implementing chaining procedures

What the task asks: Break a multi-step skill into a task analysis, choose a chaining method that suits the learner and the task, and teach the sequence until the learner performs it as one smooth routine.

Behavior-Change Procedures6 min read4 practice questionsOfficial outline (opens in a new tab)

The big idea

Many useful skills are sequences: washing hands, making a sandwich, logging in to a computer, doing laundry. A behavior chain is a fixed sequence of responses in which each response produces a stimulus change that does two jobs. It reinforces the response that produced it (as a conditioned reinforcer), and it sets the occasion for the next response (as a discriminative stimulus, or SD). The last response produces the terminal reinforcer, such as clean hands or a sandwich to eat.

Response Change Turn on tap Wash hands Rinse and dry Water runs SR and SD Soapy hands SR and SD Clean hands terminal SR produces cues
A short handwashing chain. Each response produces a stimulus change that reinforces it and cues the next response; the last one produces the terminal reinforcer.

Chaining procedures teach a learner to perform each link in order. Chained schedules as a concept are covered in B.10. This guide is about building and teaching chains.

Breaking it down

Building the task analysis

A task analysis breaks a complex skill into smaller, teachable steps in order. Common ways to build one:

  • Watch competent people perform the task and record each step.
  • Ask experts, such as an occupational therapist or a job supervisor, or consult a published task analysis.
  • Perform the task yourself and write down each step as you go.

Then fit it to the learner. One learner may need 6 steps for brushing teeth and another may need 20. Each step should be a single observable response that ends in a clear stimulus change.

Before teaching, assess which steps the learner already does:

  • Single-opportunity method: the learner attempts the task and the assessment stops at the first error or long pause. Only the steps completed before that point count. It is conservative and limits learning during the assessment.
  • Multiple-opportunity method: when the learner errs, the assessor completes that step or sets it up, and the learner continues. Every step is scored. It gives more information, though some learning may occur during the assessment.

Forward chaining

Forward chaining teaches the first step first. Once it meets criterion, the learner performs steps 1 and 2 for reinforcement, then 1 through 3, and so on. The teacher completes or prompts the rest of the chain until it is taught. Forward chaining fits well when the learner’s missing steps come early in the sequence.

Backward chaining

In backward chaining, the teacher completes or fully prompts every step except the last. The learner performs the last step and contacts the terminal reinforcer right away. Then the learner performs the last two steps, then the last three, until the whole chain is independent. Every session ends with the task finished, and each newly taught step leads straight into steps that already have a history of reinforcement.

Backward chaining with leap-aheads keeps the same order but probes untrained steps before teaching them. Steps the learner can already do are skipped rather than trained, which shortens instruction.

Total-task chaining

In total-task chaining (also called total-task presentation), the learner works through every step in every session, with prompts on any step not yet mastered, often using graduated guidance or least-to-most prompting (G.7). Training continues until the whole chain meets criterion. It suits learners who already perform many of the steps, chains that are not very long, and learners who imitate well.

Water on Wet Soap Rinse Dry Forward stage 1 Learner Teacher Teacher Teacher Teacher Forward stage 2 Learner Learner Teacher Teacher Teacher Backward stage 1 Teacher Teacher Teacher Teacher Learner Backward stage 2 Teacher Teacher Teacher Learner Learner Total task every session Learner Learner Prompted Learner Prompted Learner does the step Teacher does it Learner, with a prompt Reinforcer
The same five-step task analysis taught three ways. Forward chaining starts with the first step, backward chaining with the last, and total-task chaining has the learner do every step each session, with prompts on the steps not yet mastered. The star marks the reinforcer: after the newest step in forward chaining, after the finished task in the other two.

Two special arrangements

  • A behavior chain with a limited hold must be completed correctly within a set time to produce reinforcement. Assembly-line work and a timed math fact sheet both qualify. Teaching aims for fluency, not just accuracy.
  • The behavior chain interruption strategy uses a chain the learner already performs well. At a planned point the teacher interrupts it, for example by holding back an item, so the learner has to emit a new response, often a mand, to continue. The interruption makes the missing item valuable in that moment (G.5).

Choosing a method

No method is best for every learner, so let the data decide. Consider the learner’s current repertoire (from the assessment), the length and difficulty of the chain, how often the learner contacts reinforcement, and how soon the skill is needed in daily life. Any chain is weakened by an incomplete task analysis, weak terminal reinforcers, or variations in materials and settings the learner has not been taught to handle (G.15).

Seeing it in practice

Learner and taskMethodWhy it fits
Jada, 6, putting on a coat; she can zip once the zipper is startedBackward chainingShe finishes the task and gets outside to play every time.
Mr. Osei, 52, clocking in on a new touch-screen system at workForward chainingFinding his badge and starting the screen are where he gets stuck.
Lin, 17, doing laundry; she already performs 9 of 14 stepsTotal-task chainingMost steps are in place, and daily practice of every step keeps them there.
Sam, 9, making a snack he knows wellChain interruptionStaff leave the spoon out of reach so Sam practices asking for it.

Common mix-ups

  • Backward chaining does not mean doing the steps backward. The learner always performs the chain in its normal order. Only the order of teaching is reversed.
  • Total-task chaining is not unprompted practice. Candidates often read it as letting the learner try the whole task alone. Every unmastered step gets a planned prompt, faded as that step meets criterion.
  • Chaining vs. shaping. In a chain, each step stays in the final performance. In shaping, earlier approximations drop out (G.11).
  • Where the reinforcer comes in. In backward chaining, the newly taught step is followed by the natural terminal reinforcer. In forward chaining, reinforcement follows the newest step, before the chain is finished.
  • Single vs. multiple opportunity. The single-opportunity method stops at the first error. The multiple-opportunity method keeps going and scores every step.

Exam tip: Look at which step the learner performs independently first. The first step means forward chaining, the last step means backward chaining, and every step each session with prompts as needed means total-task chaining.

Quick recap

  • In a behavior chain, each stimulus change reinforces the response before it and cues the response after it.
  • Build a task analysis by watching competent performers, asking experts or doing the task yourself, then assess it with the single- or multiple-opportunity method.
  • Forward chaining teaches step 1 first, backward chaining teaches the last step first, and total-task chaining teaches every step every session.
  • Leap-aheads skip steps the learner already has, a limited hold adds a time requirement, and chain interruption creates a reason to communicate.
  • No method wins for everyone: choose by repertoire, chain length and data.

Further reading

  • Cooper, J. O., Heron, T. E., & Heward, W. L. (2020). Applied behavior analysis (3rd ed.), chapter 23.

Key terms

Behavior chain
A fixed sequence of responses in which each response produces a stimulus change that reinforces it and serves as the discriminative stimulus for the next response. The final response produces the terminal reinforcer.
Task analysis
Breaking a complex skill into a sequence of smaller, teachable steps. It is built by watching competent performers, consulting experts or doing the task oneself, then adjusted to the learner and checked with an assessment of which steps the learner already performs.
Forward chaining
A chaining procedure that teaches the first step of the task analysis first. Once that step meets criterion, the learner must perform the first two steps for reinforcement, and so on until the whole chain is learned.
Backward chaining
A chaining procedure in which the teacher completes or prompts every step except the last, which the learner performs to contact the terminal reinforcer. Teaching then adds steps one at a time, working back from the end, until the learner performs the whole chain.
Total-task chaining (Total-task presentation)
A chaining procedure in which the learner attempts every step of the task analysis in every session, with prompts on any step not yet mastered, until the whole chain meets criterion.
Backward chaining with leap-aheads
A version of backward chaining in which untrained steps are probed before they are taught, and steps the learner can already perform are skipped instead of trained. It keeps the backward teaching order while shortening instruction.
Behavior chain interruption strategy (BCIS)
A procedure that interrupts a well-learned behavior chain at a planned step, for example by holding back an item needed to continue, so the learner must emit a new response, often a mand, to finish. The interruption makes the missing item valuable at that moment.
Behavior chain with a limited hold
A behavior chain that produces reinforcement only if the whole sequence is completed accurately within a set time. Teaching therefore targets fluency as well as accuracy.

Check yourself

4 questions on G.12. Choose an answer to see whether you're right and why.

  1. Question 1Staff teaching Mateo to wash his hands guide him through every step except drying. Mateo dries his hands on his own and gets praise and a sticker. Once drying is reliable, he turns off the water and dries his hands on his own. Which method is this?
    Show the answer

    Answer: C. Mateo first performs the last step independently and contacts the terminal reinforcer, and earlier steps are added one at a time, which is backward chaining. Forward chaining would start with turning on the water. In total-task chaining he would work through every step each session, with prompts wherever needed.

  2. Question 2Rahel, 34, works at a supported-employment site. A multiple-opportunity assessment shows she performs 11 of the 15 steps for restocking a shelf, and the 4 missing steps are spread across the sequence. She imitates models well. Which chaining method fits best?
    Show the answer

    Answer: B. When a learner already does most steps and the gaps are scattered, total-task chaining lets her practice the whole chain every session and receive prompts only where she needs them. Forward or backward chaining would spend sessions teaching one step at a time, including steps she already performs. Shaping does not fit a sequence of distinct responses.

  3. Question 3Malcolm reliably makes his own snack: he gets a bowl, pours cereal, adds milk, gets a spoon, and eats. Staff now place the spoon on a high shelf in view, so Malcolm has to ask for it before he can eat. What is this procedure?
    Show the answer

    Answer: B. Interrupting a well-learned chain at a planned step makes the missing item valuable at that moment and creates an occasion to teach a mand. Leap-aheads are about skipping steps during backward chaining, and a limited hold adds a time requirement. Neither creates a reason to communicate.

  4. Question 4During backward chaining of a 12-step toothbrushing routine, the BCBA probes untrained steps before teaching them. When probes show the learner already performs steps 9 and 8 correctly, the BCBA moves straight to teaching step 7. What variation is this?
    Show the answer

    Answer: A. Probing ahead and skipping steps the learner can already do, while keeping the backward teaching order, is backward chaining with leap-aheads. Total-task chaining would teach every step in every session. A single-opportunity assessment measures the starting repertoire before teaching but does not describe how teaching proceeds.

Adds a step to your study record. Saved in this browser only.

Type to search all 104 guides and the glossary.