The big idea
Any instance of behavior can happen again. That property, repeatability, is what makes behavior countable, and measures of occurrence are the most common data in behavior analysis: how many times a learner asks for help, hits, completes a problem or names a picture.
The raw number is rarely enough. Twelve call-outs mean something different in a 10-minute lesson than in a 2-hour one, and 8 correct answers mean something different out of 10 chances than out of 40. This task is about choosing the measure that makes the number comparable from one session to the next.
Breaking it down
Count
Count is a simple tally of how many times the behavior occurred. It works on its own only when every observation period is the same length and nobody else limits the learner’s opportunities. Report the observation time alongside the count so readers can judge it.
Rate
Rate is count divided by the time observed, stated per minute, per hour or per day.
Rate = count ÷ observation time
Marcus asks for help 12 times in a 30-minute session on Monday and 10 times in a 20-minute session on Tuesday. The counts suggest a drop, but the rates are 12 ÷ 30 = 0.4 per minute and 10 ÷ 20 = 0.5 per minute. Help seeking actually rose.
Rate suits free operants, behaviors a person can emit at any time without someone else setting up each opportunity: talking out, stereotypy, spontaneous requests, words read aloud. It also reveals fluency. Two readers can both be 100% accurate while one reads 40 words per minute and the other 110.
A note on “frequency.” Cooper, Heron and Heward, following Johnston and Pennypacker, treat frequency as a synonym for rate. Many practitioners and some older materials use it to mean a simple count, and published studies use it both ways (Carr et al., 2018). When you meet the word, check whether time is part of the calculation. If the count was divided by time, it is a rate.
Percentage
Percentage is the number of responses of one kind divided by a total, multiplied by 100. Most often the total is the number of opportunities.
Percentage = (target responses ÷ total opportunities) × 100
Priya names 14 of 20 pictures correctly: 14 ÷ 20 × 100 = 70%.
Percentage suits restricted operants, such as discrete trials, where an instructor controls when each chance to respond occurs (G.13). A rate there would mostly reflect how quickly the instructor presents trials. Percentage is also used for interval data (C.6) and interobserver agreement (C.8).
Two cautions. First, a percentage hides its denominator: 1 of 2 and 50 of 100 are both 50%, but one response moves the first by 50 points. Report the number of opportunities. Second, percentage tops out at 100% and says nothing about speed, so a learner can sit at 100% while still responding slowly.
Celeration
Celeration is the change in rate over time, expressed as a factor per unit of time. A celeration of ×2 per week means the rate doubles each week; ÷2 per week means it halves. It is read from the Standard Celeration Chart (C.10) and is central to precision teaching. Trials to criterion, another count-based measure, belongs with efficiency in C.7.
Seeing it in practice
| Situation | Measure | Why |
|---|---|---|
| Ms. Romero counts call-outs in a class that always lasts 45 minutes. | Count (or rate) | Equal observation periods make counts comparable. |
| A clinic logs Eli’s aggression in sessions lasting 1 to 3 hours. | Rate per hour | Session length varies. |
| Hana gets 10 color-matching trials each session. | Percentage correct | The instructor controls the opportunities. |
| Ade’s math-fact accuracy has been 100% for a month. | Correct and incorrect per minute | Accuracy has hit its ceiling; speed still varies. |
| Rosa’s reading rate is tracked to see how fast it is growing. | Celeration | The question is about change in rate across weeks. |
Common mix-ups
- Comparing counts from sessions of different lengths. Convert to rate first.
- “Per session” is not a rate unless every session is the same length.
- Using rate for discrete trials. The instructor’s pace sets the ceiling. Use percentage correct or trials to criterion.
- Treating 100% as mastery. Percentage cannot show fluency; add a timed measure.
- Ignoring the denominator. “Correct on 100% of opportunities” might mean 2 of 2.
- Assuming frequency always means count. Check the arithmetic, not the label.
Exam tip: If the stem says observation periods differ in length, think rate. If it says the instructor presents a set number of trials, think percentage. If it asks how quickly a rate is growing from week to week, think celeration.
Quick recap
- Count is a tally; it is comparable only across equal observation periods.
- Rate is count divided by time and suits free operants. Many sources call it frequency.
- Percentage is a ratio times 100 and suits discrete trials; always report the denominator.
- Percentage has a ceiling and ignores speed; rate does not.
- Celeration is the change in rate over time, such as ×2 per week.
Further reading
- Cooper, J. O., Heron, T. E., & Heward, W. L. (2020). Applied behavior analysis (3rd ed.), chapter 4.
- Carr, J. E., Nosik, M. R., & Luke, M. M. (2018). On the use of the term “frequency” in applied behavior analysis. Journal of Applied Behavior Analysis, 51(2), 436-439.
Key terms
- Count
- The number of times a behavior occurs during an observation period. Count can be compared across sessions only when the sessions are the same length and opportunities to respond are not limited by someone else.
- Rate (Frequency, Response rate)
- The number of responses per unit of time: the count divided by the length of the observation period. Many authors use frequency as a synonym for rate, though others use frequency to mean a simple count, so check whether time is part of the calculation.
- Percentage
- A ratio expressed per hundred: the number of responses of a given kind divided by the total number of responses or opportunities, multiplied by 100. It suits discrete trials, but it hides the size of the denominator and cannot show speed.
- Celeration
- The change in rate of responding over time, expressed as the factor by which the rate multiplies (acceleration) or divides (deceleration) per unit of time, such as ×2 per week. It is read as the slope of the data on a Standard Celeration Chart.
- Repeatability (Countability)
- The property that instances of a behavior can occur again and again over time, which makes the behavior countable. Count, rate and celeration are measures of repeatability.
Check yourself
4 questions on C.3. Choose an answer to see whether you're right and why.
Show the answer
Answer: D. Rate is count divided by time: 30 ÷ 15 = 2.0, 36 ÷ 24 = 1.5 and 40 ÷ 40 = 1.0 per minute, so the rate fell. The raw counts rose only because the sessions got longer, and counts from sessions of different lengths cannot be compared directly.
Show the answer
Answer: D. In discrete trials, the instructor sets the number and pacing of opportunities, so a rate would largely reflect the therapist's pace. Percentage correct shows how Omar responds to the chances he gets. Percentage says nothing about fluency, and rate applies to any free operant, not only problem behavior.
Show the answer
Answer: D. Rate builds time into the measure: Lena answers 30 ÷ 1 = 30 correct per minute and Sam 30 ÷ 4 = 7.5. Percentage correct tops out at 100%, so it cannot separate two accurate learners who differ in speed. Both attempted the same 30 problems, so the count is identical too.
Show the answer
Answer: A. 3 ÷ 4 × 100 = 75% and 15 ÷ 20 × 100 = 75%, so accuracy is the same. On Monday a single answer moves the score by 25 points; on Tuesday it moves it by 5. That is why the number of opportunities should be reported with any percentage.
Adds a step to your study record. Saved in this browser only.