cumulative

C.4 Measuring duration, latency, and interresponse time

What the task asks: Measure how long behavior lasts and when it occurs relative to other events, using duration, latency and interresponse time.

Measurement, Data Display, and Interpretation4 min read4 practice questionsOfficial outline (opens in a new tab)

The big idea

Some behavior problems are about time rather than number. One tantrum a day is not good news if it lasts 40 minutes. A student who always starts work, but only after 12 minutes, has a timing problem that a count would never show.

Two properties of behavior make timing possible. Every response takes up some amount of time, which is its temporal extent. Every response also happens at a particular moment relative to other events, which is its temporal locus. Duration measures temporal extent. Latency and interresponse time measure temporal locus.

Breaking it down

Duration

Duration is how long a behavior lasts, from onset to offset. It is reported in two main ways.

  • Total duration: the sum of the time across every occurrence in the session, often reported as a percentage of the session. Jasmine works on her assignment in three stretches of 4, 6 and 8 minutes during a 30-minute period. Total duration is 18 minutes, or 18 ÷ 30 = 60% of the period.
  • Duration per occurrence: each episode timed separately, usually summarized as a mean. Tantrums lasting 3, 9 and 6 minutes give a mean of 18 ÷ 3 = 6 minutes per tantrum.

The two can tell different stories. If tantrums fall from four a day to two but each lasts twice as long, total duration has not changed. When both how often and how long matter, report count and duration per occurrence together.

Duration needs onset and offset rules in the definition (C.1), such as “the episode ends after 10 seconds without crying.” Without them, two observers will time the same tantrum differently.

Latency

Latency is the time from the onset of a stimulus, such as an instruction or cue, to the start of the response. A teacher says “line up” at 10:00:00 and Ibrahim stands at 10:00:25, so the latency is 25 seconds.

Use latency when the problem is starting too slowly (following instructions, answering a question, getting up after the alarm) or too quickly (answering before the question ends). The clock stops when the response begins, not when it ends.

Interresponse time

Interresponse time (IRT) is the time between two successive responses of the same class, usually timed from the end of one to the start of the next. A worker finishes assembling one part and starts the next 40 seconds later: the IRT is 40 seconds.

IRT and rate move in opposite directions: shorter IRTs mean a higher rate. Use IRT when pacing is the concern, such as a child who eats too fast, a reader who pauses too long between words, or a worker whose pace slows across a shift. Differential reinforcement of low rates (G.2) is built around IRTs.

Instruction Latency: 3 min IRT: 3 min IRT: 5 min Working Working Working Duration: 4 min Duration: 6 min Duration: 8 min 0 30 Total duration: 4 + 6 + 8 = 18 of 30 minutes (60%) Duration per occurrence: 18 ÷ 3 = 6 minutes on average
Jasmine's 30-minute work period on one timeline. Latency runs from the instruction to the start of the first stretch, duration covers each stretch from start to end, and IRT runs from the end of one stretch to the start of the next.

Seeing it in practice

ConcernPropertyMeasureSample data
“Malik’s tantrums go on forever” (home)Temporal extentDuration per occurrence14, 9 and 22 minutes: mean 15 minutes
“Sofia is out of her seat for most of math” (school)Temporal extentTotal duration21 of 35 minutes: 60%
“It takes Mrs. Abernathy, 78, ages to get up after her alarm” (care home)Temporal locusLatency18 minutes from alarm to feet on the floor
“Leo eats so fast he gags” (feeding clinic)Temporal locusIRT between bitesMean 3 seconds; goal 15 seconds
“Staff are slow to answer call buttons” (residential program)Temporal locusLatencyButton press to staff arrival: mean 6 minutes

Notice how the concern, in the family’s or staff’s own words, points to the measure. “Forever” is about duration. “Ages to get up” is about latency. “So fast” is about IRT.

Common mix-ups

  • Latency vs. duration. Latency ends when the response starts; duration begins when it starts.
  • Latency vs. IRT. Latency starts with a stimulus such as an instruction. IRT starts with the previous response.
  • Total duration vs. duration per occurrence. Total duration can stay flat while count falls. Pick the one that matches the concern, or report both.
  • Timing brief, high-rate behavior. Each hand flap lasts about a second, and timing each one is impractical. Count it or use an interval method (C.6, C.9).
  • No offset rule. Without one, duration data cannot be trusted.

Exam tip: Find where the stopwatch starts. If it starts when the behavior starts, it is duration. If it starts when an instruction or cue is given, it is latency. If it starts when the previous response ends, it is IRT.

Quick recap

  • Temporal extent is measured by duration; temporal locus by latency and IRT.
  • Total duration sums all episodes; duration per occurrence times each one.
  • Latency runs from a stimulus to the start of the response.
  • IRT runs from one response to the next, and shorter IRTs mean higher rates.
  • Duration data need clear onset and offset rules.

Further reading

  • Cooper, J. O., Heron, T. E., & Heward, W. L. (2020). Applied behavior analysis (3rd ed.), chapter 4.

Key terms

Duration
The amount of time a behavior lasts, from its onset to its offset. It can be reported as total duration (the sum of all episodes in a session, often as a percentage of the session) or as duration per occurrence (each episode timed separately).
Latency (Response latency)
The time from the onset of a stimulus, such as an instruction or cue, to the start of the response. It measures how quickly a person begins to respond.
Interresponse time (IRT)
The time between two successive responses of the same class, usually timed from the end of one response to the start of the next. Shorter interresponse times go with higher rates of responding.
Temporal extent
The property that every instance of behavior takes up some amount of time, from its start to its end. Duration is the measure of temporal extent.
Temporal locus
The property that every instance of behavior occurs at a particular point in time relative to other events. Latency and interresponse time are measures of temporal locus.

Check yourself

4 questions on C.4. Choose an answer to see whether you're right and why.

  1. Question 1Mr. Ferris says 'Take out your reading book' and starts a timer. He stops it when Ama starts unzipping her backpack. What is he measuring?
    Show the answer

    Answer: C. The timer runs from the instruction (a stimulus) to the start of the response, which is latency. Duration would time the response itself from start to finish. Interresponse time starts at the previous response, not at an instruction.

  2. Question 2During a 40-minute play period, Diego plays cooperatively three times, for 6, 4 and 10 minutes. What are the total duration and the mean duration per occurrence?
    Show the answer

    Answer: D. Total duration adds the episodes: 6 + 4 + 10 = 20 minutes, which is 50% of the period. Duration per occurrence divides that total by the number of episodes: 20 ÷ 3 ≈ 6.7 minutes. Ten minutes is the longest single episode, not the mean.

  3. Question 3A feeding therapist wants Leo to pause longer between bites because he eats so fast he gags. Which measure fits the goal best?
    Show the answer

    Answer: C. The concern is pacing, the time from one bite to the next, which is interresponse time. Latency only captures how quickly the first bite starts. Meal duration and bite count can change for many reasons without showing whether the pauses between bites got longer.

  4. Question 4A plan cut Nia's tantrums from 6 per week to 3 per week, but her parents say things are no better. Which data would most likely explain their view?
    Show the answer

    Answer: D. Halving the count is no relief if each tantrum now lasts twice as long, because total time spent in tantrums would be unchanged. Fewer tantrums mean longer, not shorter, gaps between them. Latency measures time from a cue to a response, not how often the behavior occurs.

Adds a step to your study record. Saved in this browser only.

Type to search all 104 guides and the glossary.