Overview › Build it in GraphPad Prism › Guide 7
Export and place the figure
Export the graph from Prism as a file Word and journals accept, put it in your manuscript with an APA-style figure number, title, and note, and add alt text.
You will be able to
- Export the graphmultiple baseline layout from Prism in a format that suits Word and your journal, at its final size.
- Place the figure in a manuscript with an APA figure number, title, and note.
- Write alt text that names the graph type, the behavior, and the pattern a reader should see.
Part A: Final check at final size
- Compare with the finished project. Open reversal-abab.prism, the finished example for your graph, next to your own project. (In Prism 9 or earlier, open reversal-abab.pzfx instead.) Double-click an axis in each to compare the settings in Format Axes, and a data point to compare Format Graph.
- Run the checklist. Score the graph with the self-review checklist (print it or tick it on screen). Look especially at fonts between 8 and 14 pt, no color, the floating zero, phase labels above the plot, and phase-change lines that run the full height of the plot.phase labels above the top tier only, and phase-change lines that run the full height of each tier, joined by the stepped line between tiers.phase labels above the plot, a phase-change line that runs the full height of the plot, and a different symbol for each treatment, named in the legend.and a different symbol for each condition, named in a legend that covers no data. A multielement graph has no phase-change lines.phase labels above the plot, phase-change lines that run the full height of the plot, and dashed criterion lines that stay inside their own subphase.
Part B: Export the graph as a file
Choose a vector format when you can. Vector files store lines and text as shapes, so they stay sharp at any size and are what most journals prefer for line art. Image (raster) formats store pixels, so they need a high resolution to print sharply.
- Open Export. Go to the graph and choose File›Export, or right-clickControl-click the graph in the navigator and choose Export. Export the layout from Guide 5, Multiple baseline figure, not a single tier. Go to the layout and choose File›Export, or right-clickControl-click the layout in the navigator and choose Export. The dialog is titled Export Layout.
- Pick a format.
Format Use it for EMF (or EMF+) Vector. Inserts cleanly into Word and PowerPoint on Windows. The usual choice for a manuscript draft. PDF Vector. Widely accepted by journals for figures. EPS Vector. Asked for by some journals and publishers. TIF Image. Use when a journal asks for TIFF; choose 600 dpi. PNG Image. Fine for slides, posters, and course work; choose 600 dpi for print. WMF, JPG, BMP Older or lower-quality formats; you don’t need them for these figures. Prism 10 for Windows offers EMF, EMF+, WMF, PDF, EPS, TIF, JPG, PNG, and BMP. It has no SVG export; Prism for Mac does.Prism for Mac offers SVG as well as PDF. If your journal asks for an image file such as TIFF, look for it in the same list and choose 600 dpi. (Prism for Windows has no SVG export, so a coauthor on Windows will send EMF or PDF instead.)Format Use it for PDF Vector. Widely accepted by journals, and Word for Mac can insert it as a picture. SVG Vector. Sharp at any size; good for websites and slides. - Set the options. Set the background to white. Keep the size at the actual size, so the fonts stay at the sizes you set in Guide 3, Part D. For an image format, set the resolution to 600 dpi. Where Prism offers to export text as text or as outlines, choose text, so the words stay editable and searchable. Untick Open this folder after exporting unless you want the folder to open; Prism may tick it again next time.
- Name the file and export. Use a name that matches the manuscript, such as Figure 1, and choose the folder. Turning it in for a class? Put your last name and the graph type in the name, such as Lastname ABReversalMultiple BaselineAlternating TreatmentsFunctional AnalysisChanging Criterion Figure 1, unless your instructor asks for a different name or format (see class assignments).
How big is the figure? With the axis lengths from Guide 3 and the labels from Guide 4, the exported graph is about 6.7 × 4.6 in (17 × 11.7 cm).With three 3.5-cm tiers and the space between them, the exported layout is about 7 in (18 cm) wide and 6.3 in (16 cm) tall. On a page with 1-inch margins, Word scales it down slightly to the 6.5-in text width, which keeps the 10-pt axis numbers above 9 pt, well inside APA’s 8 to 14 points. For a journal that prints single-column figures about 3.25 in wide, shorten the X axis in Format Axes and check the text size again before you export.
Check your journal’s figure requirements. Many journals ask for vector files (PDF or EPS) or a high-resolution TIFF for line art, often 600 dpi or more at final size. Export the format your journal names for the submission, even if you used EMF or PDF in your Word draft.
Part C: Put the figure in your manuscript
- Insert the exported file. In Word, choose Insert›Pictures›This DeviceInsert›Pictures›Picture from File, select the file you exported, and click Insert. A picture file can’t change by accident. When you change the graph in Prism, export it again and replace the picture.
- Add the figure number and title above, and the note below. Follow the APA layout shown below.
Figure 1
Percentage of Intervals On Task Across Baseline and Token Economy Phases
Note. Data are percentages of 10-s intervals with on-task behavior for one participant. Baseline = no programmed consequences; Intervention = token economy.
- Figure number: bold, on its own line above the figure (Figure 1).
- Title: one double-spaced line below the number, in italic title case.
- Note: below the figure. Start with Note. in italics and explain abbreviations, measures, or anything not obvious from the graph.
- One figure, all tiers: place the exported layout from Guide 5, not a single tier. The tier names (Participant 1, 2, and 3) sit inside the panels, so the note does not need to explain them.
- Legend: keep it inside the graph. Because it names Treatment A and Treatment B, the note does not need to explain the symbols.
- Criterion lines: say in the note what the dashed lines show, as the example does.
- No title inside the graph. The title belongs in the manuscript text, so keep Prism’s graph title hidden (Guide 3).
- Refer to every figure in the text, and number figures in the order you first mention them.
Part D: Add alt text
- Open alt text. In Word, right-click the picture and choose View Alt Text or Edit Alt Text. In Word, Control-click the picture and choose Edit Alt Text.
- Describe the finding, not the decoration. For example: "Reversal graph of on-task behavior. On-task behavior was low in both baseline phases (25% to 45% of intervals) and high in both token economy phases (60% to 92%). It rose each time the token economy began and fell when it was withdrawn.""AB graph of problem behavior. Problem behavior occurred in 48% to 66% of intervals during baseline and decreased during intervention, from 40% in the first intervention session to 5% in the last.""Multiple baseline graph of correct responses for three participants. Baseline scores were 25% or lower for every participant. Accuracy rose only after intervention began for that participant, after sessions 5, 8, and 11, and reached 95% to 100% by the last sessions.""Alternating treatments graph of responses per minute. Responding was 1.9 to 2.5 per minute in baseline. When the two treatments alternated, Treatment A decreased from 1.2 to 0.2 per minute, while Treatment B stayed between 1.6 and 2.0.""Multielement functional analysis graph of responses per minute in five conditions. Responding was highest in the Demand condition (2.5 to 3.6 per minute), near 1 per minute in Attention, and 0.6 per minute or lower in Tangible, Alone, and Play.""Changing criterion graph of minutes of exercise. Exercise was 7 to 10 minutes per session in baseline. In each of the five criterion phases (12, 20, 16, 26, then 30 minutes), including the step back down to 16 minutes, it stayed within 1 minute of the criterion in effect." Name the graph type, the behavior, and the pattern a reader should see. Leave out formatting such as fonts, line weights, and tick marks.
Practice
Before a reviewer sees your figure, practice spotting construction problems. The graph construction practice shows new graphs, each with one problem or none, and asks whether it is ready to submit.
You finished the Prism guides. Next, learn to read the graphs you made in Visual analysis, or see how the same figure is built in Excel or Google Sheets.